Facebooktwittergoogle_plusredditpinterestlinkedinmail

Steve: Hi, it’s Steve from PartSelect. Today, we’re going to show you how to change a water dispenser inlet valve which are quite common for refrigerator repair in Queens, NY where it gets really cold and these things can break very easily. It’s a really easy job. All you need is a quarter-inch nut driver and a pair of slit-joint pliers. I’m going to show you how we do it.

 

Now to do this repair, we’ll need access to the back of the refrigerator so we’ll have to pull it far enough to disconnect the power and also turn off and disconnect the inlet water supply to the valve. Once we’ve done that, we’re going to remove a couple of screws on the back cover here, gives us a little better to the valve with quarter-inch hex-edge screws.

 

Now very carefully, tilt that panel all of the way and that will give us access to the two screws that secure the valve to the frame of the refrigerator. So we remove those. These screws are different. And then the ones used on the back cover, these are a machine-thread screw and make sure we don’t mix those up.

 

Then there’s bound to be some water in those waterlines so may need to have a rag handy to catch the excess water. Then you can pull the valve all through the opening far enough to disconnect the two wire harnesses. Now we just unthread the two connectors that hold those waterlines to the valve. And we can discard the old valve.

 

Check the condition of the tubing, make sure it’s not cracked or brittle. It’s all right, we can reuse that. We simply slide the tubing into the opening of the valve and carefully thread the coupling nut tight. We can go just a little tweak with the pliers, not too tight and make sure that it’s not binding that tubing, not so it won’t fit in properly.

 

Now we can reconnect the wire harness to the valve in the two-different sized terminals on that valve: each quarter-inch and 316 so you can’t mix them up. Then we’ll mount the valves back to the side of the refrigerator, make sure we don’t pinch any of the wires or the tubing.

 

Make sure those are nice and snug. Now we can remove the protective cover to the inlet of the valve. And we’ll carefully fold that back panel back into position and reinstall the screws on it. Then we’ll reconnect the water supply to it, turn it on, reconnect the power, then our repair’s complete.

 

Told you it was an easy job. Thanks for watching and good luck with your repair.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Refrigerator Repair Tips From Ask The Expert

Host: As temperatures warm up it becomes all of the more important to make sure you’re appliances in your house are working properly and a big one is your refrigerator. Here to talk about how to keep your refrigerator running cool is Leonard Jordan from Bear Appliance Repair in Queens, NY. It’s good to see you Leonard.

Leonard Jordan: Yes it’s been a long time.

Host: It’s been a little while.

Leonard Jordan: Yes.

Host: So we’re talking refrigerators today.

Leonard Jordan: Yes.

Host: How do you keep your refrigerator running cool?

Leonard Jordan: Well there’s a lot of maintenance that you can do. One of the main things you want to check for in this time of the year is get that condenser clean. Make sure your door seals are sealing up properly.

Refrigerator Condenser

Refrigerator Condenser

Host: And this is a condenser right there?

Leonard Jordan: Yes, this is a condenser to a refrigerator that we actually pulled off and had to change because it had a leak in it.

Host: Yes, it looks like its seen some better days.

Leonard Jordan: Yes it has and it just got a small, what we call pinhole leak, leaked out over time but what we see a lot – we get this question, “Can I just squirt some Freon in there and get this thing working?”

Host: That’s not the problem?

Leonard Jordan: Basically if you’ve got it leaking out you got to get whatever component is leaking. The good thing is, the seal system problems on refrigerators are very uncommon. They are one of the more expensive repairs but most of the time they’re not a sealed system. It’s a fan, maybe a thermist or thermal cutout or something like that.

Number one reason why your refrigerator isn’t working properly

Host: What is the number one reason that usually your refrigerator isn’t working properly?

Leonard Jordan: I would probably say between fans and something with the defrost system. So a heater, a thermist or a thermal cutout, something like that.

Host: Condenser or something like that?

Leonard Jordan: No that’s a very, very rare problem actually. But I brought it in because I had it there in my scrap pile and thought-

Host: Why not.

Leonard Jordan: -that’s cool. Let’s go look at them. Most people don’t know what it is.

Host: I’ve actually never seen one before.

Leonard Jordan: Yes so.

Host: I know the one I had in my car not too long ago wasn’t working so-

Leonard Jordan: Yes right.

Host: I can tell you what it feels like to not have a working condenser. Now can you recharge any of the components there, the condenser or anything else?

Leonard Jordan: Yes. Once we go in and replace a condenser what we’ll do is we’ll go in there and evacuate that system and then recharge it, bring it back to factory specs. So you don’t ever want to just go squirt Freon because you’ve got all those contaminants, those non-condensables that are in the refrigerator that are going to shorten the life of the compressor. You’re going to have problems later.

Host: Plus you have food in there.

Leonard Jordan: Yes you don’t want it going out and in three four months it leaks out again. Now you’ve got this problem. So if you ever do have a Freon leak, something like that, you’d want to get it repaired properly.

Host: And you can’t just blow on it to cool it down right? That’s not a method you’d recommend?

Leonard Jordan: Are you Superman or something? No you can’t.

Host: Is that something you think we should do?

Leonard Jordan: Yes, 1-800-superman. No it doesn’t work that way.

Host: He does have a Bat phone doesn’t he?

Leonard Jordan: No.

Host: He just knows. Your refrigerator goes out boom. You know you’ve got to fix a problem right there.

Leonard Jordan: Right on.

Host: So obviously we need you to come fix it. If they want to find you so they can figure out to get their refrigerator back up and working, how do they find you?

Leonard Jordan: Well the best place is go on the web. We’re at Bear Appliance Repair or you can call us at our phone number for refrigerator repair in Queens, NY. There’s coupons on the web, different things like that that help you out with that bill.

Host: What kind of coupons you running for the refrigerator?

Leonard Jordan: The refrigerator we haven’t set that up now but we’ll probably do something, some tune up special. I’m not sure yet.

Host: Sounds good Leonard.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

ExpensiveRefrigeratorsAlthough repairing your appliances is one of the best ways to save money during the current financial crisis, sometimes it may end up costing you more money than hiring a professional. In worst case scenarios, you may end up purchasing a new appliance.

Hiring the best refrigerator repair in Queens, NY may sound like a difficult job. In this article, we are going to look at some reasons why hiring a refrigerator service is important.

5 Reasons why you should hire refrigerator repair in Queens, NY

 

1. Qualification.

Unless you are a refrigerator specialist, then it is impossible that you have the qualification needed to repair appliances safely. Professional refrigerator repair technicians in Queens have the qualification needed for the job. They have the certification and have passed all the relevant tests needed so as to repair people’s appliances.

No matter how easy a given repair looks, complications may arise during the repair. To avoid this, you need to hire a professional who understands how to handle these complications once they arise. Apart from saving you money, this will also ensure that the lifespan of your appliance is prolonged.

2. Customer service.

Hiring professional appliance repair does not stop at the qualification and the skill level. Apart from offering you excellent repair service, you will also get to enjoy excellent customer service. There is nothing as frustrating as dealing with a company with poor customer service.

By hiring Bear Appliance Repair in Queens, NY you will get to enjoy the best customer service in the city.

3. Knowledge and skill.

Trained professionals not only offer you their qualifications but also their knowledge and skill. No two appliances are the same. Because of this, you need to trust your repair to individuals with the knowledge and skill set needed to get the job done efficiently and correctly.

4. Quality service.

By hiring the best repair service in Queens, you are guaranteed of getting the highest quality service possible. Refrigerators and other electric appliances are delicate equipment. They need to be handled with care. Because of this, you need to hire the best technicians to provide you with the best service to avoid spending more money and reducing the lifespan of your appliance by repairing them now and then.

5. Money back guaranteed.

Professionals not only promise you the best services, but they also promise you refunds if your expectations are not met. Not all appliance services providers have the confidence to promise you this. By hiring a professional appliance technician in Queens, you will not only be assured of getting your refrigerator repaired by the best, but you are also assured of getting your money back in case things go wrong.

Apart from this, professional refrigerator repair service providers are covered by insurance. You don’t have to worry about facing court battles in case things go wrong during the repair. If the technician gets injured during the process, or the refrigerator blows off while the repair, the insurance of the company has this covered, you will not have to incur the costs.

Things to consider when hiring refrigerator repair in Queens.

Now that you know the importance of investing on professional appliance repair in Queens, there are some things you need to consider before hiring a repair service. These include;

  • Experience- Only hire a repair company with the longest experience in providing repair services in the city. No matter the qualification and skill level of technicians, the experience will always determine the quality of the service.
  • Reputation- The best companies have the best reputation. To determine the reputation of a company, you can use the internet and read customer reviews. You can also ask your family, friends or colleagues for recommendations on companies they have had previous dealings with.
  • Price- Only hire a repair company that offers their services within your budget range. Avoid companies that charge too much as this will end up straining your budget. Also, avoid companies that charge prices that all below the current market range as this means that their services are poor.

Investing in a professional appliance repair is very important. It will ensure that you avoid wasting time and money on repeat visits, increase the lifespan of your appliances and ensure that the safety of your appliances is upheld.